PERFECT LED LIMITED is professional manufacturer of LED Strip and LED aluminium profile since 2013!
Language
PERFECT LED LIMITED is professional manufacturer of LED Strip and LED aluminium profile since 2013!
Home
Blog
How to Connect LED Strip to Power Supply?
By Sally Shan
Updated: September 26, 2024
Most high-quality LED strips are low-voltage LED strips that need to be connected to a power supply to work. The power supply is also called an LED driver because it drives the LED strip to work. The power supply is also called an LED transformer because it converts the mains 220VAC or 110VAC to 12V or 24V.
This article will show you how to connect LED lights to a power source.
Voltage and wattage
First, you need to check the working voltage of your LED strip, and the most common working voltage is 12V or 24V. You must ensure that the operating voltage of the LED strip is the same as the power supply’s output voltage.
Second, you need to calculate the total power of the LED strip. The calculation method is to multiply the power of one meter LED strip by the total number of meters.
Finally, according to the 80% principle, you need to ensure that 80% of the power supply wattage is greater than or equal to the total wattage of the LED strip. This will help extend the life of the power supply.
Power supply with DC connector
The LED strip has a DC female connector, and the power supply has a DC male connector.
This power supply is also called a power adapter.
LED strip with DC connector
If the LED strip happens to have a DC female and the power supply has a DC male, you need to plug the DC female and DC male and connect them.
LED strip with open wires
If the LED strip only has open wires, you need to buy the accessories that convert the wires to DC connectors and then connect them.
LED strip without wires after cutting
When the LED strip is cut, how do I connect it to a plug-in power supply?
You can connect the LED strip via a solderless wire connector or soldering a DC female connector.
The AC power plug of the power adapter can be inserted into the socket to supply power to led strip lights. Corresponding to small projects, this is very convenient and suitable.
Power supply with open wire
A power supply with an open wire usually is a waterproof power supply.
LED strip has open wires
You can hardwire the wires from the LED strip to the cables from the power supply.
Twist the two red wires together, then cover and tighten the wire nut. The same goes for the black wire.
Note that you need to ensure that the red wire is connected to the red wire and the black wire is connected to the black wire. If misconnected, the LED strip will not work.
connect led strip to power supply with wire nuts
Another option is that you can connect the wires with a solderless wire connector.
LED strip without wires after cutting
For LED strips without any wires, you can solder wires to the LED strip or use solderless LED strip connectors. Then use the method above to connect the LED strip to the power supply.
Power supply without wire
A power supply without wires is generally a non-waterproof power supply with terminals for wiring.
You’ll need a screwdriver to operate this power supply because the terminals are fastened to the wires by screws.
Step 1: Unscrew the screw on the terminal block with a screwdriver.
Step 2: Put the wire of the LED strip into the corresponding position.
Step 3: After inserting the wires of the LED strip, tighten the screws with a screwdriver, and pull by hand to test if they are tight enough.
Step 4: Connect the AC plug in the same way.
For more details on the wiring diagram of the LED light strip, please read How to Wire LED Strip Lights(Diagram Included).
Can I connect multiple LED strips to the same LED power supply?
Yes, you can connect multiple LED strips to the same power supply, but you need to ensure that 80% of the power supply’s wattage is greater than the total wattage of the LED strips.
Serial connection
When you connect multiple LED strips in series, there may be a voltage drop problem, and the further the LED strips are from the power supply, the dimmer it will be.
More information about voltage drop, you can read What is LED strip voltage drop?
Parallel connection
The inconsistent brightness of LED strips is unacceptable. To get around this, you can connect multiple LED strips to the power supply in parallel.
Conclusion
In conclusion, connecting LED strip lights to a power supply is a simple process that can be easily accomplished with the right tools and a bit of know-how. Whether you’re installing LED strips for accent lighting or as part of a larger home automation project, this blog will help ensure a safe and successful installation.
Perfect Led manufactures high-quality LED strips and LED neon flex. All of our products go through high-tech laboratories to ensure the utmost quality. Besides, we offer customizable options on our LED strips and neon flex. So, for premium LED strip and LED neon flex, contact Perfect Led ASAP!
Get in touch with us
Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!
They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.
We are committed to producing the best quality products at the most competitive prices. Therefore, we sincerely invite interested companies to contact us for more information.
