LED Strip Light is frequently used in people's daily life or work. By using this product, people can light their room and cities.
1.Characteristics
Adopt SMD3528 LED as lighting source
High CRI >80.
Voltage : DC 12V .
Can be cut by every 3leds
Color Temperature: 3000K-6000K
Import original 3M adhesive tape
Adopt Samsung 5630 LED as lighting source
High CRI >80.
Voltage : DC 24 V .
Can be cut by every 6leds
Color Temperature: 2700K-6500K
Import original 3M adhesive tape
Adopt SMD5050 LED as lighting source
High CRI >80.
Voltage : DC 12V .
Can be cut by every 3leds
Color Temperature: 3000K-6000K
Import original 3M adhesive tape
Adopt COB LED as lighting source
High CRI > 90.
Voltage : DC 24V .
Color Temperature: 3000K-6500K
Import original 3M adhesive tape
4000K-6500K
1800K-2700K-3500K
Adopt SMD2216 LED as lighting source
High CRI >90
Voltage : DC 12V .
Can be cut by every 3leds .
Color Temperature: 1800K-6500K
Import original 3M adhesive tape
2.Parameters
Part No. | LED Type | LED Qty/5M | Voltage | Dimension | IP Rank |
PSI601B | SMD3528 | 300 | 12V | 5000*10mm | IP20 IP50 IP65 IP66 IP67 IP68 |
PSB122X | Samsung 5630 | 600 | 24V | 5000*12mm | IP20 IP50 IP65 IP67 IP68 |
PSI601A | SMD5050 | 300 | 12V | 5000*10mm | IP20 IP50 IP65 IP67 IP68 |
PSB122F-CCT | SMD2216 | 1200 | 24V | 5000*10mm | IP20 IP50 IP65 IP66 IP67 IP68 |
3.Dimension
PSI601B
PSB122X
PSI601A
PSB122F-CCT
Installation Instructions
Taking off the protection sheet of 3M adhesive tape on the back of the LED strip when installation, then stick it to the installed location.
Installation Notes
l Pls kindly connect to the LED driver in accordance with the connection diagram.
l Installation surface must be smooth and clean, otherwise the product will fall off.
l Avoiding to bend at the location of LED and resistor when installation, so as to damage the product and influence the lifespan.
l Pls note to be anti-static when installation and usage, and sharp object to touch the product is not allowed.
l Don’t touch the acid and alkali corrosion chemicals when installation and usage.
l Minimum bend radius of the product can not be less than 30MM
Common problems and solutions
l Please check the positive and negative terminal, the red wire (+) connect to the anode of power supply ,and black wire ( -)connect the cathode of power supply ; check the connection between the strip and the driver is intact ; check the voltage between the strip and driver is consistent .
l Please check if power supply is connected, or if the switch is in the connected position when the light can not work
l If the lamp to be on and off frequently, pls check whether the connection is bad or loose
PERFECT LED LIMITED
Add: 1-4F,D Building, CanBo Industrial Park, HuaFa North Road, GongMing Town, GuangMing New District, ShenZhen, GuangDong, China.
Tel:+86-755-29941796
Fax:+86-755-29941766
Web:www.perfect-led.com