People bought LED strip lights and found that they have 180 degrees, which can be installed in parallel to meet 360 degrees. However, the illumination area is always limited, in order to ensure that the entire panel has brightness and no dead corners. We have adopted flat panel lights.
It can be cut by every 1 led. Any shape are available.
It is widely used in light box, bar, large area lighting,led panel light. A led strip can be folded into two sides lighting, three sides lighting, and full coverage lighting.
DC12V And DC24V Are available.
2700K/3000K/4000K/6500K/7500K , CRI80/90/95
We have three types of LED chip lights for you to choose from.
Part No | LED Type | LED Qty/PCS | Working Voltage | Current | Watt/PC | RA | Beam Angle | Color | Dimension | IP Rank |
PSB422C | SMD2835 | 420LED | DC24V | 1.5A | 35W | Ra≥80 | 120° | 2700K 3000K 4000K 6500K | 503.1*235*6.5mm | IP20 |
PSB842C-CCT | SMD2835 Dual White | 840LED (420*2) | DC24V | 1.5A | 35W | Ra≥80 | 120° | 2700K-6500K | 503.1*235*6.5mm | IP20 |
PSB802C-RGBW | SMD2835 RGBW | 800LED (100*4) | DC24V | 0.8A | 20W | Ra≥80 | 120° | RGBW (W:2700K/3000K/ 4000K/6500K) | 503*236*6.5mm | IP20 |
Accessories Bag:
1 | short sheet to sheet connection wires (4PCS) | Length 60mm | 4 | protective bumpers (8PCS) | Φ12mm* 8.3mm |
2 | long sheet to sheet connection wires (4PCS) | Length 150mm | 5 | WAGO connectors (2PCS) | 18*13*8m m |
3 | cable management clips(4PCS) | 12.6*9. 6*6mm | 6 | power input cable (1PCS) | Length 250mm |
How to use led sheet light?
Step1: Clean the wooden board first, measure the length, width and height of hte board and calculate how many led sheet light to use.
Step2: Attach the led sheet to the wooden board, or fix it with screws. Then use the wires in the accessary bag to connect all the led sheet light. Stick bumper on the lighting board.
Step3: Turn on all the light panels and check to see if they are all lit. If it is not lit, please check whether the positive and negative connections are wrong.
Step4: Cover the marble slab on top of the led sheet light, you can get a good lighting effective.
*Characteristics
* Adopt SMD 2835 as light source.* High CRI,standard is CRI 80.
* Keep every batches in one Bin, SDCM<1.
* 3M 300LSE adhesive tape for easy intallation.
* Widely used in light box, bar, large area lighting,led panel light.
* CE,RoHS,UL, 3 years warranty.
* Can be cut by every 1 led, Any shape are available. A led strip can be folded into two sides lighting, three sides lighting, and full coverage lighting.