NEWS
VR

how to install neon tube with led strip? | PERFECT LED

April 19, 2023
how to install neon tube with led strip? | PERFECT LED

First our neon tube adopt 100% silicon material and neon tube light adopt 100% silicon coating process, which can reach IP68 waterproof Rank.

Then, some people ask me the length, 5m 10m 20m are available for you before shipping.

We can cut it into the length according to your request.

Last but also important, many clients want to know the best installation way to let led strip into neon tube.

Step 1: Attach the led strip traction wire inside the neon tube to the led strip wire. The wire must be tied firmly to avoid falling off.


Step2: Insert the side of led bead of led strip inside of the card slot of neon tube.


Step 3. Then level the led strip and the neon tube, and start pulling the led strip slowly from the other side of the tube until the led strip is pulled to the other side of the neon tube.


Step 4: Light up and test to see if the neon tube is working properly. If there is a problem, you can pull out the led strip directly, repair it or replace it before you put it back in.


Step 5: Put the neon tube end cap cover the led strip wire and insert the silicone into the cap.


Step 6: Plug the neon tube end cap into the silicone and install it on the neon tube.


Other notes:

Face to the light surface, fold the strip, the minimum bending diameter is 40mm.

Light surface upwards, the strip is bendable to right or left naturally, the minimum bending diameter is 50mm.

If your bending angle is less than this number, it will damage the strip light inside.

We can install led strip with neon tube before shipping if you want this service.

When you received neon tube light, and want install it into aluminum profile channel, you may want to know:


First, prepare the screws and fixed clips, then adjust the fixed clips to the appropriate place, use a screw driver to fix the screw, then put the light emitting surface upwards,

 then insert the neon light into the fixed clips. Last, fix neon light completely into the fixed clip, the neon light surface must be parallel to the top edge of fixed clip.

After reading this passage, hope you learn how to install neon light, if you have any question, welcome to contact me or leave me a message by email.

The following are actual scene photos from my client who used neon lights in their project

 

 

 

 

 

The above content is original or published with the authorization of the original author. Without the consent of the original author or current publisher, no individual or unit is allowed to reprint or use the above content...


Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --

Send your inquiry

Choose a different language
English
Nederlands
dansk
Tiếng Việt
한국어
日本語
العربية
italiano
Português
русский
français
Deutsch
Español
Current language:English